df005s thru df10s page: 1 + frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 1a surface mount bridge rectifiers df005s thru df10s features z plastic material used carries underwriters laboratory recognition 94v-0 z glass passivated chip z ideal for printed circuit board z high temperature soldering guaranteed: 260 c /10s at 5 lbs., (2.3kg) tension mechanical data z case: molded plastic, dfs, dimensions in inches and (millimeters) z terminals: lead solderable per mil-std-202, method 208 z polarity: polarity symbols marked on body z mounting position: any z weight: 0.38 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% ratings symbol df005s df01s df02s DF04S df06s df08s df10s units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward output rectified current at ta=40 c i o 1.0 a peak forward surge current single half sine-wave superimposed on rated load i fsm 50 a typical junction capacitance per element (note 1) c j 25 pf storage temperature range t stg - 55 to + 150 operating temperature range t op - 55 to + 150 electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol df005s df01s df02s DF04S df06s df08s df10s units maximum instantaneous forward voltage drop per element at io dc v f 1.1 v maximum reverse current t a =25 at rated dc blocking voltage per element t a =125 i r 10 0.5 a ma note: 1. measured at 1.0 mhz and applied reverse voltage of 4.0 volts 0.134(3.40) 0.124(3.15) 0.346(8.8) 0.323(8.2) 0.205(5.2) 0.197(5.0) 0.047(1.20) 0.037(0.95) ~ - ~ 0.406(10.3) 0.391(10.0) 0.335(8.5) 0.307(7.8) 0.140(0.35) 0.008(0.20) 0.255(6.5) 0.245(6.2)
df005s thru df10s page: 2 rating and characteristics curves df005s thru df10s fig. 1 - derating curve for output rectified current 1.0 0.8 0.6 0.4 0.2 0 average forward output current amperes 20 40 60 80 100 120 140 150 ambient temperature, fig. 2 - maximum non-repetitive peak forward surge current per leg 60 50 40 30 20 10 0 peak forward surge current amperes 1 10 100 number cycles at 60h z fig.3 - typical forward characteristics 10 1.0 0.1 .01 instantaneous forward current, amperes 0.4 0.6 0.8 1.0 1.2 1.4 instantaneous forward voltage, volts t j =25 typical distribution fig. 4 - typical reverse characteristics 10 1.0 0.1 .01 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage (%) t j =25 instantaneous reverse current (ua) t j =150 single sine -wave ( jedec method )
|